Skip to main content

Basic Repeater Dashboard

This dashboard shows the status and the traffic of one tracked repeater. It uses only standard cards.

Dashboard YAML​

  1. Go to Settings > Dashboards.
  2. Add a new dashboard from scratch.
  3. Open the dashboard.
  4. Select the pencil icon.
  5. In the three-dot menu, select Raw configuration editor.
  6. Paste the YAML.
  7. Replace def456abc0 (repeater prefix, 10 characters), def456abc012 (contact sensor prefix, 12 characters) and myrepeater with your values. To find them, filter Developer Tools > States on _bat_.
  8. Select Save.
title: myrepeater
views:
- type: sections
max_columns: 4
title: myrepeater (Repeater)
path: myrepeater
badges:
- type: entity
entity: binary_sensor.meshcore_def456abc0_online_myrepeater
name: Online
- type: entity
entity: sensor.meshcore_def456abc0_battery_percentage_myrepeater
name: Battery
- type: entity
entity: sensor.meshcore_def456abc0_bat_myrepeater
name: Voltage
- type: entity
entity: sensor.meshcore_def456abc0_uptime_myrepeater
name: Uptime
- type: entity
entity: sensor.meshcore_def456abc0_out_path_len_myrepeater
name: Hops
- type: entity
entity: binary_sensor.meshcore_myrepeater_def456abc012_contact
name: Advert
sections:
- type: grid
cards:
- type: heading
heading: Radio
- type: history-graph
title: Airtime Utilization
entities:
- entity: sensor.meshcore_def456abc0_airtime_utilization_myrepeater
- entity: sensor.meshcore_def456abc0_rx_airtime_utilization_myrepeater
- type: history-graph
title: Signal
entities:
- entity: sensor.meshcore_def456abc0_noise_floor_myrepeater
- entity: sensor.meshcore_def456abc0_last_rssi_myrepeater
- type: history-graph
title: Last SNR
entities:
- entity: sensor.meshcore_def456abc0_last_snr_myrepeater
- type: grid
cards:
- type: heading
heading: Power and requests
- type: history-graph
title: Battery
entities:
- entity: sensor.meshcore_def456abc0_battery_percentage_myrepeater
- type: history-graph
title: Voltage
entities:
- entity: sensor.meshcore_def456abc0_bat_myrepeater
- type: entities
title: Requests from Home Assistant
entities:
- entity: sensor.meshcore_def456abc0_request_successes_myrepeater
name: Successes
- entity: sensor.meshcore_def456abc0_request_failures_myrepeater
name: Failures
- entity: sensor.meshcore_def456abc0_out_path_myrepeater
name: Route
- entity: button.meshcore_def456abc0_refresh_firmware
name: Refresh firmware version
- type: grid
cards:
- type: heading
heading: Messages (msg/min)
- type: history-graph
title: All messages
entities:
- entity: sensor.meshcore_def456abc0_nb_recv_rate_myrepeater
- entity: sensor.meshcore_def456abc0_nb_sent_rate_myrepeater
- type: history-graph
title: Direct
entities:
- entity: sensor.meshcore_def456abc0_recv_direct_rate_myrepeater
- entity: sensor.meshcore_def456abc0_sent_direct_rate_myrepeater
- type: history-graph
title: Flood
entities:
- entity: sensor.meshcore_def456abc0_recv_flood_rate_myrepeater
- entity: sensor.meshcore_def456abc0_sent_flood_rate_myrepeater
- type: grid
cards:
- type: heading
heading: Queue and duplicates
- type: history-graph
title: Duplicates (msg/min)
entities:
- entity: sensor.meshcore_def456abc0_direct_dups_rate_myrepeater
- entity: sensor.meshcore_def456abc0_flood_dups_rate_myrepeater
- type: history-graph
title: TX Queue Length
entities:
- entity: sensor.meshcore_def456abc0_tx_queue_len_myrepeater
- type: entities
title: Totals
entities:
- entity: sensor.meshcore_def456abc0_nb_recv_myrepeater
- entity: sensor.meshcore_def456abc0_nb_sent_myrepeater
- entity: sensor.meshcore_def456abc0_full_evts_myrepeater
- entity: sensor.meshcore_def456abc0_recv_errors_myrepeater

Notes​

  • The Advert badge shows the contact sensor state: fresh, stale or discovered.
  • The Online badge shows if the repeater answers the requests of Home Assistant.
  • The *_rate sensors show messages per minute between the last two status responses.
  • The Route row is empty when the companion hears the repeater directly or has no route. With no route, Hops shows unknown.
  • Refresh firmware version costs one credit. See Mesh Traffic Policy.
  • With Enable Neighbor Entities set, add sensor.meshcore_def456abc0_neighbor_count. See Repeater Neighbors.
  • If two entries track the same repeater, the IDs of the second entry get a suffix such as _2. Use the IDs of one entry.